Description
Sure Stride Impressions mats are adhesive-backed mats printed with custom logos/artwork/messages.
Comes in packs of 6
Sure Stride Impressions mats are adhesive-backed mats designed to relay important messages or reminders to customers, visitors, and employees. Choose from an array of stock messages or design your own using your logo/artwork and messaging.
Choose the color for the logo mat of your choice. For example, A1, J5, etc.
Sure Stride Impressions mats are adhesive-backed mats printed with custom logos/artwork/messages.
Comes in packs of 6
Weight | N/A |
---|---|
Size | 17" x 17", 17" x 24" |
Mat Size Imprint Area
17" x 17" 6.5" x 8.5"
17" x 23.5" 8.5" x 11.5"
Special sizes are not available. PMS matching is not available. Imprint area is available in landscape/horizontal orientation only.
Minimum text height: 1/4"
Minimum line thickness: 1/16"
These text requirements arefor general use; however, special fonts and very thin letter forms may need tobe made larger or thicker and will be approached on a case-by-case basis.
Light background colors should be avoided dueto their tendency to show dirt on the mat more than a darker or neutral tone.
Please do not pick up the mat to clean the floor underneath until you are ready to replace it.
Sure Stride Impressions mats feature a low profile and can be left in place during daily floor cleaning activities. Floor scrubbers, vacuums, brooms, and mops will pass right over it without causing damage to the mat. Standard floor scrubbers may be used to clean the mat, however, please use low settings for water and pressure, and note that extended use of floor scrubbers could result in removal of the printed design.
Sure Stride mats are designed to dissipate water and dry quickly, however, standard fans and floor blowers can be used to expedite drying. For extremely wet conditions, use a wet vacuum or extractor to remove excess water.
Sure Stride mats are designed to last up to 3-4 months under normal conditions. If the mats are installed in a high-traffic area or shows signs of wear or a weakened bond to the floor prior to its intended life, it should be replaced.
SURFACE
Material: Solution-dyed polypropylene, with a heat-sealed polyurethane design
Weight: 12 ounces per square yard
BACKING
Material: Releasable adhesive; moisture barrier is a polyester film
OVERALL THICKNESS: 3/32" (0.0938")
STANDARDS & TESTING