Complete Comfort Mat

Clear


Free Shipping

Complete Comfort mats are ergonomically superior anti-fatigue mats designed for dry or damp environments.

  • Comfortable – 5/8″ thick nitrile/PVC-blended foam provides superior anti-fatigue properties
  • Clean – Anti-microbial treatment provides lifetime protection from odors and degradation
  • Safe – Beveled edges provide a safe transition from floor to mat; certified high-traction by the National Floor Safety Institute (NFSI)
  • Easy to Clean – Lightweight and flexible for easy handling and cleaning
  • Grease and oil resistant; chemical resistant
  • Available with drainage holes for use in damp areas
SKU: 494 Categories: ,

Description

Complete Comfort mats are ergonomically superior anti-fatigue mats designed for dry or damp environments.

Additional information

WeightN/A
Color

Black

Size

2' x 3', 3' x 10', 3' x 4', 3' x 5', 4' x 6', 4' x 8'

Recommended for use in wet or dry commercial and industrial settings, the Complete Comfort II is particularly popular in healthcare facilities since it is anti-microbial treated and can be autoclave sterilized.

Complete Comfort II mats can be commercially laundered to remove oil, grease, and soil.  The formula below does not require extensive mechanical action or drying; it is designed to dissolve grease residue by using hot water to emulsify oils and grease.  Complete Comfort mats do not require extracting or drying. 

  1. Flush 2-3 minutes, high water level, cold water
  2. Break 5-10 minutes, high water level, 140 degrees F (60 degrees C)
  3. Rinse 2 minutes, high water level, cold water
  4. Rinse 2 minutes, high water level, cold water
  5. Drain 2 minutes
  6. Lay mats flat following removal from washer.  Allow to cool before rolling.

Complete Comfort II mats can be cleaned in two different ways.

  • They can be commercially laundered (see Laundering Instructions)
  • Washed by hand using the following instructions:  Scrub with a deck brush (as needed) using a detergent with a neutral pH, rinse with a hose or pressure washer, and hang to dry.

CONSTRUCTION
Material: High-density, closed-cell nitrile foam
Thickness: 1/2 inch (0.5")

STANDARDS & TESTING

  • Passes flammability standard DOC-FF1-70
  • Compression Deflection:
          50.5% at 20 psi
          63.1% at 40 psi
  • ASTM C1028-96 static coefficient of friction:
         Dry 0.96
         Wet 0.82
  • ESD rating of static dissipative:
         Surface to surface at 50% relative humidity 3.3 x 10^9 ohms
         Surface to surface at 12% relative humidity 3.4 x 10^9 ohms